Fill-Coat® #6 Cold-Applied Wax Casing Filler

Description

Fill-Coat #6 installation by portable air powered mastic pump
Fill-Coat #6 can be installed by a variety of portable air powered mastic pumps. The material is pumped into the annulus of the casing until the casing is full.

Fill-Coat #6® is a cold-installed/high temperature petroleum based casing filler compound that can be installed at ambient temperature as low as 50°F (10°C) with portable pumps. The product is used in bridge abutment casings, and it can be used in casings with elevated temperatures.

End Use

Fill-Coat #6 is used to fill the annulus of gas distribution bridge abutment casings. it prevents corrosion by filling the void in the casing annulus. In addition, new water is prevented from entering the gas-filled casing. Applications include aboveground cased pipe (like bridge abutment casings).

Application Procedures

Fill-Coat #6 can be installed by a variety of portable air powered mastic pumps (1, 5, or 50 gallon capacity). The material is pumped into the annulus of the casing until the casing is full. The casing ends can be sealed with Trenton Fill-Putty™, Trenton #2 Wax-Tape® or an epoxy filler once it is full.

Packaging

55-gallon drums

Advantages

  • Non-Melting
  • Anti-Corrosive
  • Water Resistant
  • Dielectric
  • Inert
  • Non-Toxic
  • Non-Flammable
  • Pliable

Specifications

Flash Point STM D 92 greater than 300°F
350°F minimum
Specific Gravity 1.02 to 1.08
Temperature Range 30°F to 225°F
Color Dark Brown
Consistency grease-like
Dielectric Strength Greater than 100 Volts per mil
Density ASTM D1475 7.898 lbs. per gal